Here is a list of tools which you'll need when building a cabinet this our recommendation for your tools you'll need. If you have all of these you will be good to go.

TOOLS

• Pencil
• Measuring tape / Ruler
• Steel / Set Square
• Circular Saw with a blade to match your wood choice
• Jig Saw/Coping Saw with a blade to match your wood choice
• Router
  • 1 – 1.6 mm T-Slot Cutter – Used to cut slots to mount T-Moulding

• Drill
  • 28mm Spade bit (Cutting Button/Joystick holes
  • Drill bit set
  • Counter sink bit

• Wire crimpers
• Soldering Iron (Might be required)
• Rubber Mallet – Some parts may require some persuasion
• Wood Glue – You may choose to glue some joins
• Clamps – Used to hold parts together while cutting / gluing

MISC

Depending on your cabinet design you might require some additional parts

• Piano / Standard hinge
• Perspex – For top marquee and cover the screen
• Toughen Glass – Cover screen if not using Perspex
• Glass Clips – These are used to hold the Perspex / Glass onto cocktail machines
• Clamps – These can we used to hold cocktail tops to the body
• T-Moulding
• Power Bar – Mounting a min four port power bar within your cabinet makes it easier powering equipment inside.
• Castors / Rubber Stoppers – You need to rest your machine on something.